Meibaopumps

NEWS
NEWS

Exhaust gas tower special water pump

Views :
Update time : 2023-10-25

  Water pump for waste gas tower is a kind of centrifugal pump, which mainly relies on the centrifugal principle to complete the transmission of liquid. Due to the role of independent impeller structure, so that the internal pressure can be maintained in balance, the liquid will be completely sealed, and the structural characteristics of the impeller is installed next to the impeller blade, and the opposite blade on the side, installed with a protruding ring. When running, the liquid flowing to the shaft (due to internal pressure) will be blocked by the counter-pressure effect of the protruding ring and the opposing vane. When the motor is running, the centrifugal force prompts the liquid seal to open automatically, forming a frictionless state during operation. When the motor stops running, the elasticity of the liquid seal itself automatically springs back to seal after the centrifugal force disappears, blocking the rise of chemical gases, preventing the motor and bearings from being eroded by chemical gases, and prolonging the service life of the motor and the pump.

  Meibao exhaust gas tower pump product features:

  Small amount of air mixing, larger head

  1. Customised depth of 700-1500mm according to customer's tank

  2. All the liquid receiving parts of the pump are made of FRPP, CFRPP, PVDF, depending on the chemical liquid to be conveyed.

  3. Double-layer dry shaft seal design prevents chemical gases from damaging the motor bearings.

  4. Special designed impeller, even if the impeller reverses occasionally, it will not damage the pump.

  5. Suitable for all kinds of acid and alkali liquid circulation, cooling, spray washing equipment, exhaust gas tower, wastewater treatment, chemical tank liquid transfer.

  6. It can be used in conjunction with chemical liquid filter and is suitable for all kinds of chemical plating liquid circulation and transfer.

  Note: Meibao "acid and alkali tank vertical pump" is independently developed and produced by Meibao environmental protection, according to the specific conditions can be customised for enterprises.

  In summary, simply give you a summary of the advantages of the above six points, it is because of these advantages, will be used by the majority of customers, get everyone's approval, if you need a pump or electroplating filter, you can contact Mabel environmental protection.

Contact MEIBAO
Tel
+86-13922943272

Send your message to us

Related News
What pump should be used to transfer ferric chloride solution?
What pump should be used to transfer ferric chloride solution?
06 .28.2024
 In industrial production, the transfer of ferric chloride solution is a crucial job. Ferric chlori...
Magnetic drive circulating pumps can be used in which areas of application
Magnetic drive circulating pumps can be used in which areas of application
10 .26.2023
 Engineering plastics is a material containing fluorine atoms, its excellent corrosion resistance, ...
What kind of pumps are used for transferring highly concentrated saline wastewater?
What kind of pumps are used for transferring highly concentrated saline wastewater?
07 .17.2024
 Today, when environmental protection is getting more and more attention, the treatment and transpo...
What kind of pumps are used for acid and alkaline wastewater transfer in electroplating parks?
What kind of pumps are used for acid and alkaline wastewater transfer in electroplating parks?
05 .09.2024
 The electroplating industry, as an important part of modern industry, brings the challenge of wast...
Related Products
chemical centrifugal pump
chemical centrifugal pump
  • Head:0-38m
  • Voltage:220V/380V
  • Material:GFRPP, PVDF
  • Flow rate:0-3750L/min
  • Pump Power:0.75-15KW
chemial liquid filter
chemial liquid filter
  • Voltage:220V/380V
  • Material:PPH, PVDF
  • Flow rate:30T
  • Pump Power:65W-3.75KW
vertical pump with idling in tank
vertical pump with idling in tank
  • Head:0-39m
  • Voltage:220V/380V
  • Material:GFRPP, PVDF
  • Flow rate:0-1800L/min
  • Pump Power:0.75-11KW
Corrosion-resistant self-priming pumps
Corrosion-resistant self-priming pumps
  • Head:0-29m
  • Voltage:220v/380v
  • Material:GFRPP, PVDF
  • Flow rate:1-1000L/min
  • Pump Power:1.5Kw
  • Inlet and outlet caliber/port size:DN50